A scrubber separator is actually a two-phase separator with a small liquid loading. This kind of separator is used to recover liquid from the production…
In case of high gas separation, filter separator can be used to solve the problem. In the figure above you can see filter separator schematic…
In case of very low liquid rate separation, two-barrel separator is commonly used to solve the problem. The basic schematic of two-barrel separator is shown…
The figure above showed a typical spherical separator schematic. The spherical separator had the same working principle as vertical separator; the main difference is the…
The figure above is a schematic diagram of two phase vertical separator. In this vertical separator configuration the fluid enters the separator through the side.…
There are three common type of process separator: horizontal separator, vertical separator, or spherical separator. The figure above is an example of horizontal two phase…
Three views of an example centrifugal inlet diverter.
Horizontal bulk treater.
Vertical free-water knockout.
The liquid is first flashed at an initial pressure and then flashed at successively lower pressures two times before entering the stock tank.