Corrugated plate interceptor (CPI) is the most common parallel plate interceptor in oil facilities. CPI is an improvement of the PPI, CPI take less area…
Author: and
A small increase in water droplet diameter will increase the settling rate since water droplet is squared in the settling equation. The water droplet size…
The gravity force is commonly used in oil treating equipment to separate the water from the oil in continues phase; the water droplet tends to…
We can use plate coalescers to improve gravity separation process, a plate coalescers can be formed as internal plates on skim tanks or vessels. The…
The non-water substance appearance in crude is the major cause of foam in crude problems. Those substances will not be removed until the crude enters…
Crude oil outputted from production separator may contain some water. The water is removed from crude oil through an oil treating process. There are factors…
When the fluid release gas bubbles, foam may appears on the surface. To stabilize this foam we may add some chemicals or we can use…
Fluids outputted by the wellhead are made of form many different compounds of hydrocarbon and each compound has its own physical characteristic. The fluids flow…
Wet gas enters the glycol contact tower through an inlet which located in base and flows upwards through the bubble caps. Dry glycol will flow…
Before gas can be sold the gas need to be dehydrated from its water content. This efforts need to be done to prevents hydrates and…